EK company announced the launch of its new EK-Quantum Delta2 TEC for LGA 1700 and 12th generation Intel Core CPUs
I, the leading provider of computer cooling solutions (click here for more information on the subject), has released the latest generation of its TEC solution. We are talking about the new EK-Quantum Delta2 TEC, a CPU water block for extreme cooling. In collaboration with Intel (here for more info), EK has developed a next-generation water block for enthusiasts looking for consistent peak performance. And of course, the ultimate overclocking of unlocked 12th Gen Intel Core desktop processors.
Operation of the new EK-Quantum Delta2 TEC
This water block is based on technology Peltier (ThermoElectricCooler) and can transport heat using the Peltier effect. Inside the TEC plate, the Peltier effect produces a temperature difference between the two sides by causing a current to flow through it. This means that the cold plate, which is in contact with the CPU, it can be turned down at lower temperatures to the ambient one while the liquid cooling circuit cools the hot side of the TEC.
Details
EK-Quantum Delta2 TEC brings further improvements to the original EK-Quantum Delta TEC design. Instead of an original TEC plate, the new generation has four TEC plates. These are welded to the bottom of the water block that goes over the CPU, improving contact and cooling the block and possibly the CPU. Another improvement is that TEC plates are no longer made of aluminum oxide but of aluminum nitride (AlN). Aluminum Nitride (AlN) Ceramic Plates are state-of-the-art thermoelectric plates that greatly improve energy efficiency, especially at higher power levels.
Design
The waterblock has the characteristic design Quantum, also found on Velocity 2 products, along with the controller unit. The controller is now a separate element, intended to be mounted on one 120mm fan close to the inside of the case. As such, it no longer compromises the visual appearance of the water block, as was the case with previous generations of EK TEC products. The control unit can now connect and control the pump and fans of the circuit used to cool the TEC plate. Thus making it even easier to use.
A breadth of improvements
And that’s not where the improvements stop. More updates have been made to the isolation which prevents condensation from forming, now with a high precision dense rubber frame instead of foam. The waterblock uses integrated mounting screws already equipped with retention springs. It also has two additional thermal sensors, one on the warm side and one on the cold side of the Peltier element. This is for precise monitoring and control of TEC plates. It is powered exclusively by the Intel Cryo Cooling technology. A unique combination of hardware, software and firmware designed to help unleash extraordinary performance for gamers and those looking for the highest boost rates.
Uniqueness and maximum performance
This unique cooler is made for the maximum performance and frequencies during heavy loads on a single core or lighter loads on multiple cores. It is not intended for torture and stress testing software that places a heavy synthetic load on all cores, such as Prime95. L’EK-Quantum Delta2 TEC is built using a continuous flow cooling motor large surface area specially designed with Intel Cryo cooling technology. The latter combines aesthetic uniformity and near-silent operation with technological advances in thermal solutions. The cooler features an outstanding application of CPU cooling in sub-ambient temperatures. All this using the thermoelectric cooler (TEC) plate while it continuously monitors and adjusts temperatures dynamically. In this way, obtaining an ideal operating environment for sustained gaming performance.
Temperature
Liquid coolers they are unable to reach temperatures below ambient temperaturewhile EK-Quantum Delta2 TEC uses cutting-edge technology. Actively cools the CPU in sub-ambient temperatures while it extracts and dissipates the heat generated by the TEC plate through the traditional liquid cooling circuit.
The innovation
EK-Quantum Delta2 TEC uses an innovative two-pronged approach to mitigate condensation, a by-product that has far surpassed previous sub-environment cooling attempts. The cooler is equipped with a compact integrated insulating rubber liner which isolates all cold surfaces exposed to environmental conditions inside the PC. While Intel Cryo Cooling technology continuously monitors the TEC and ambient temperature to adapt to such conditions and prevent condensation generated by the cooling process. An additional sensor is placed inside the control unit to monitor the humidity inside the frame and avoid dew point.
Availability and price
The EK-Quantum Delta2 TEC is available for the pre-order through the EK Online Store (Editor’s note: in the United States it costs about 540.00 dollars). Availability of this product is scheduled for mid-August 2022.
And you? What do you think of this new one EK-Quantum Delta2 TEC? Let us know with a comment and stay tuned to TechGameWorld.com for more news and reviews from the world of technology (and more!).
The article EK: launched the new EK-Quantum Delta2 TEC comes from TechGameWorld.com.