Thermaltake has announced its new Divider series products, namely, the Divider 370 and 170 TG ARGB Chassis
The Thermaltake (Read more here), the leading premium DIY PC brand for case, cooling, gaming peripherals and memory solutions for enthusiasts, is pleased to announce its new products. Let’s talk about the Divider 370 TG ARGB Mid Tower Chassis e Divider 170 TG ARGB Micro Chassis, adding new members to the Divider series. New models emphasize maximum airflow performance with a large mesh front panel optimized for airflow and fans ARGB PMW pre-installed to offer better heat dissipation. The Divider 370 and 170 also retain the excellent characteristics of the Divider series. The design is modern with the unique steel panel. Plus a window in 3mm scratch-resistant tempered glass on the left side. This offers a visually split appearance while offering a fantastic interior view. Divider 170 and Divider 370 are now available in black and white.
Details of the new Divider 370 and 170 TG ARGB Chassis
Divider 370 and 170 are the next generation gaming PC cases. The large internal space to support the hardware and cooling solution can meet the needs of gaming enthusiasts. The Divider 370 has a space for the motherboard E-ATX (12 x 13) and a radiator up to 360 mm at the front and top. Also, it comes with three 120mm ARGB PWM fans pre-installed with three hydraulic bearings which can effectively reduce operation noise and improve thermal efficiency with excellent reliability. The outstanding ARGB PWM fan is designed to sync with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync e ASRock Polychrome.
It supports motherboards with a header 5V addressable RGB, which allows you to control the lights directly from the aforementioned software without installing any additional lighting software or controllers. For Divider 170, it can support up to one motherboard Micro ATX and a 280mm radiator at the front. In addition, the bright 120mm PWM ARGB fans integrated with two hydraulic bearings allow the system to achieve better cooling performance. Also, the coverage Integrated PSU The full length of the Divider 170 and Divider 370 helps users keep cable management clean and organized and not obstruct the airflow into the case. It is designed to provide enough space to hide unsightly cables and leave your flawless setup to take center stage. In addition to the Divider 370, the pre-installed GPU support allows for vertical installation of the GPU and prevents failure of the graphics card.
Features of the Thermaltake Divider 370 TG ARGB Mid Tower
With the unique and elegant appearance, easy-to-use functions, ultimate cooling solution and upgradeable system, the Micro Chassis Divider 170 TG ARGB and Mid Tower Divider 370 TG ARGB chassis allow you to create your own epic build in a way elegant and robust. Unique side panel design with a tempered glass window.
The outstanding feature of the Divider 370 TG ARGB is the unique panel which included a steel panel and a 3mm tempered glass window on the left side. The side panel is visually split to create a unique look, tool-free and easy to remove. Tempered glass window is thicker and more scratch resistant than standard acrylic.
Mesh front panel and pre-installed ARGB PWM fans
The Divider 370 TG ARGB features a large stylish mesh panel optimized for airflow in the front, which offers a unique split design and additional air intake through the mesh. The Divider 370 TG ARGB is equipped with three PWM ARGB fans 120mm with pre-installed hydraulic bearings which can effectively reduce operating noise and improve thermal efficiency. The lighting effect of the fans can be controlled by the button Physical RGB on the I / O panel or from the motherboard software of ASUS, GIGABYTE, MSI and ASRock. There are 27 RGB lighting modes to play with when using the physical RGB button. Also, it’s simple to switch between physical button control and motherboard software control by long pressing the RGB button for three seconds.
Other characteristics
The integrated power supply cover is designed to hide unsightly cables with good general ventilation. The pre-installed GPU support allows for vertical installation of the GPU, but also helps to reduce the weight on the PCI-E slots. The Divider 370 TG ARGB has a well-designed removable magnetic fan filter on the top and right inner side. At the base, the removable filter offers excellent dust protection and dirt reduction, ensuring a dust-free environment. The cooling performance of the Divider 370 TG ARGB is excellent. The large mesh panel optimized for airflow in the front allows for optimal air intake. The cooling exhausts are located on the back of the case. On the top and right side, there are vent mechanisms for air intake or exhaust depending on the overall design of the user’s PC layout.
Excellent hardware support and cooling solution
The Divider 370 TG ARGB has excellent hardware support. It can support a CPU cooler with a maximum height of 170 mm, VGA with a maximum length of 400 mma power supply with a length of up to 230 mm (with HDD Cage), due HDD da 3,5 with two 2.5 SSDs or a total of four 2.5 SSDs. When it comes to cooling, the Divider 370 TG ARGB comes pre-installed with three 120mm PWM ARGB fans with hydraulic bearings which can effectively reduce operating noise. at the same time, they can improve thermal efficiency. You can also choose to put three 140mm fans in the front and one 120mm fan in the back. Also, it can hold up to three 120mm fans on the top, two 120mm fans on the right side of the motherboard. For compatibility with radiators, it can support up to 360mm at the front and top.
Convenient I / O ports and synchronization
Two USB 3.0 and one HD audio jack are positioned on the top panel to ensure direct access when needed. Designed to sync with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome. It supports motherboards with a header 5V addressable RGBwhich allows you to control the lights directly from the aforementioned software without installing any additional lighting software or controllers.
Features of the Thermaltake Divider 170 TG ARGB Micro Chassis
The outstanding feature of the Divider 170 TG ARGB, as with the model previously described, is the unique panel which included a steel panel and a 3mm tempered glass window on the left side. The side panel is visually split to create a unique, tool-free, easy-to-remove look. Tempered glass window is thicker and more scratch resistant than standard acrylic. The Divider 170 TG ARGB features a large, stylish mesh panel optimized for airflow at the front, offering a unique split design and additional air intake through the mesh.
The Divider 170 TG ARGB is equipped with two 120-inch ARGB PWM fans mm with pre-installed hydraulic bearings which can effectively reduce the operation noise and improve the thermal efficiency. Fan lighting can be controlled by the physical RGB button on the I / O panel or by the motherboard software by ASUS, GIGABYTE, MSI and ASRock. There are 27 RGB lighting modes to play with when using the physical RGB button, and it’s simple to switch between physical button control and motherboard software control by long pressing the RGB button for three seconds.
Integrated power supply cover
Divider 170 TG ARGB is equipped with a power supply cover full length that offers plenty of space to store cables while keeping free airflow for the hard drives and power supply. The Divider 170 TG ARGB has a practical magnetic fan filter on top and left inner side that simply attaches for easy dust filtration and particle protection. At the base of the frame, an additional filter provides excellent protection against dirt and dust. The cooling performance of the Divider 170 TG ARGB is excellent. The large mesh panel optimized for airflow at the front allows foroptimal air intake. The cooling exhausts are located on the back of the case.
Hardware support, I / O ports and cooling
The Divider 170 TG ARGB has excellent hardware support. It can support a CPU cooler with a maximum height of 160mm, VGA with a maximum length of 350 mm (without radiator), a power supply with a length of up to 200 mm (with HDD Cage), two 3.5 HDDs with due 2.5 SSD or a total of four 2.5-inch SSDs. When it comes to cooling, the Divider 170 TG ARGB comes with dual 120mm ARGB PWM fans with hydraulic bearings which can effectively reduce operating noise and improve thermal efficiency, you can also choose to put two 140mm fans in the front and a 120mm fan in the back. In addition, it can hold up to two 140mm fans at the top. For compatibility with radiators, it can support up to 280mm at the front. Two USB 3.0, one USB 2.0 and one HD Audio are positioned on the top panel for direct access when needed.
And you? what do you think of these new ones Divider 370 e 170 TG ARGB Chassis? tell us yours below in the comments and stay connected on TechGameWorld.com, for the latest news from the world of technology (and more!).
The article New Divider 370 and 170 TG ARGB Chassis comes from TechGameWorld.com.