In this article we tell you about ORTUR Laser Master 2 Pro, a laser engraver that can meet the needs of artists and professionals thanks to its precision and speed.
We present to you ORTUR Laser Master 2 Pro, an update of the Laser Master 2 on all aspects of specifications and performance. It took 9 months of research and development by ORTUR to finally enable a premium laser engraving experience that can cover the needs of an average or even higher level of users at an affordable price.
ORTUR Laser Master 2 Pro: the ultimate engraving experience with greater precision
ORTUR Laser Master 2 Pro is equipped with OLM-PRO-V10 motherboard and 24V 32-bit MCU circuit. With a accuracy of 0.08mm x 0.15mm, the focal point is one quarter the size of the average focal point of other lasers. By using the 12-bit precision PWM control signal, up to 1000 shades of gray scale that offer real, photo-like details.
The extremely advanced laser module with high power second generation FAC technology delivers multiple power options from 1W to 40W. With the same amount of power, a thinner 50mm fixed focus laser beam can cut a thicker object, it can even go beyond the 9mm thick edge.
ORTUR Laser Master 2 Pro: three times faster than average
The Ortur engineering team has optimized the motion algorithm and updated it to the firmware of the Ortur Laser 1.5 series, increasing the maximum speed from 4,000mm / min to 10,000mm / min. Furthermore, compared to the traditional USB to serial port, The MCU’s native USB CDC interface supports up to two times the baud rate, greatly reducing the delay caused by the transmission of commands and therefore reducing the engraving time. Therefore, the engraving speed of the ORTUR Laser Master 2 Pro is twice that of the Laser Master 2, and three times the market average. In addition, ORTUR laser engravers have been fully tested with Laser, the world’s most popular and easy to use free and open source laser control software.
ORTUR Laser Master 2 Pro: stable and consistent engraving around the clock
The 24 V powered electrical system integrated into the motherboard supports a powerful laser module and multiple add-ons. As tested in the laboratories, the reinforced cable it can withstand more than 5,000,000 bends, which guarantee a longer life to the engraver. Buckle in the wire connection, high quality flexible cables and wire protection chains guarantee 24/7 uninterrupted operation and consistent engraving results. Furthermore, the structure made of metal gives the ORTUR Laser Master 2 Pro excellent solidity.
ORTUR Laser Master 2 Pro: without safety concerns
More functions to ensure safety are integrated into ORTUR Laser Master 2 Pro so that users can engrave without worries. When the machine is moved or tilted, or the computer stops the engraving process: the motors stop moving, the laser will stop automatically to avoid possible damage to the machine and the user. In case of flames, the alarm will beep and flash. Additionally, an emergency stop button has been added to make sure it can be manually stopped when needed.
Where to buy
ORTUR Laser Master 2 Pro is available on the official website at the price of 399 dollars, however, various promotional campaigns are active that will allow you to access advantageous discounts. Thanks to the “ORTURPRO” coupon you can get a discount that lowers the price to 389 dollars. Furthermore ORTUR a I decide to give 15o YYR 2.0 to as many lucky ones. In fact, every day the first 5 orders will receive the product worth about 70 dollars for free. Winners will be announced day by day, referring to the previous day’s purchases. Finally, we remind you that the promotions will be valid until July 1st, so don’t waste time if you are interested! That’s all from the electronic section, keep following us.